Home
/
40V 8" Cordless Battery Pole Saw w/ 2.0 Ah Battery & Charger
40V 8" Cordless Battery Pole Saw w/ 2.0 Ah Battery & Charger
Trim and cut those pesky tree limbs
- Chain/Bar Length: 8"
- What's Included: One (1) 2.0Ah Battery and One (1) Charger
- Up to 45 cuts (w/ included batteries)
- Pole Length: Can be extended to 9 ft.
- Max Reach: 11 ft.
- Charge Time: 60 min. w/ 2.0Amp Charger
- Power 75+ Tools with any Greenworks 40V Battery
Quantity
ADD TO CART
-
Detail
8 inch
Bar Length
45 Cuts
Number of Cuts
21 cc
Gas Equivelant
11 Ft
Max Reach
2-Step
Easy Start
Automatic
Oiler
Explore More Feature Highlights
- 8" BAR AND CHAIN - for easy trimming of branches.
- EASY ADJUST TENSIONING - for quick tightening of the chain.
- AUTOMATIC OILER - applies oil to the bar and chain to ensure durability and extend the life of the chain.
- 8 FT LENGTH - 3-piece aluminum shaft can be extended to 9 FT (11 FT total reach).
- Removable battery powers over 75 Greenworks 40-Volt tools.
- 8" BAR AND CHAIN - for easy trimming of branches.
- EASY ADJUST TENSIONING - for quick tightening of the chain.
- AUTOMATIC OILER - applies oil to the bar and chain to ensure durability and extend the life of the chain.
- 8 FT LENGTH - 3-piece aluminum shaft can be extended to 9 FT (11 FT total reach).
- Removable battery powers over 75 Greenworks 40-Volt tools.
What oil do I use with my chainsaw?
Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required.Why is my chainsaw leaking oil?
All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them and the pole saws upright with the motor head at the top.
During first use users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.
How large of a branch/log can I cut?
If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.What is a pole saw?
Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.How should I hold my pole saw?
For best balance when using a pole saw do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you will have proper control of the tool in unexpected situations. Always hold the unit firmly with both hands; keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For further details, refer to your owner’s manual.Can the pole saw be used for hedges?
The pole saw would be capable of trimming hedges; however, a pole hedger would be more appropriate for the job and leave a cleaner look.Can you remove the poles and use this as a chainsaw?
No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you the ability to remove the middle extension pole to shorten the unit by a few feet.I know the handle cannot be removed but can the pole saw be used on items near the ground?
This would depend on the user's ability to maintain control in an awkward angle. The pole saw is designed for high level hard to reach branches. It is not ergonomically suited for low cutting and extreme caution should be taken.Specifications & Owner’s Manual
Lithium-ion
Battery Type
8-inch
Bar/Chain
11ft
Max Reach
Auto
Oiler Type
31.2 fps
Chain Speed
3-piece
Aluminum Shaft
45 Cuts
With 2 Ah Battery
Tool
Chain Tensioning
PRODUCT Specifications Voltage 40V Product Warranty 3-year Battery Warranty 3-year Package Dimensions 44.1"Lx9.8"Wx6.5"H Product Weight 8.2 lbs. Chain Pitch 3/8" Chain Gauge .050" Drive links 33 Oil capacity 80 ml Manual & Warranty
Assembly Guide
Learn More
Owner's Manual
View Manual
3-Year Tool & Battery Limited Warranty
Learn More - 8" BAR AND CHAIN - for easy trimming of branches.
-
Customer ReviewsNo comments
